Documentation > USER GUIDE > SQL Summary

SQL Summary

CREATE SCHEMA

CREATE SCHEMA [ IF NOT EXISTS ] [ schema_name ]
    [ AUTHORIZATION auth_name ]
    [ DEFAULT CHARACTER SET character_set_name ]
    [ PATH schema_name [, schema_name] [, ... ] ]
    [ schema_element [, schema_element] [, ... ] ]

   schema_element:
        create_statement | alter_statement | drop_statement | grant | revoke

Define a new schema

Examples:

CREATE SCHEMA tst;
CREATE SCHEMA AUTHORIZATION hrm;
CREATE SCHEMA hr AUTHORIZATION hrm;
SET SCHEMA tst;
SELECT CURRENT_SCHEMA;

Note: You must specify either a schema_name or an auth_name or both, see examples. The auth_name can be either an existing role or user name. The ownership of a schema can be assigned to only one user/role, and it can not be modified after its creation. Therefore, to share the ownership of a schema, one must assign the ownership of a schema to a role at the creation of the schema. Subsequently, the role can be granted to multiple users to own the schema. Only the 'monetdb' user and the 'sysadmin' role can create a new schema. Therefore, to allow other users to create schemas, the 'monetdb' user should assign the 'sysadmin' role to the intended users. The DEFAULT CHARACTER SET and PATH options are not (yet) implemented and here for compatibility reasons with the SQL standard. The default character set is UTF-8 and not changable.

For details see: SchemaDefinitions,

Associated system table: sys.schemas.

ALTER SCHEMA

ALTER SCHEMA [ IF NOT EXISTS ] schema_name RENAME TO new_schema_name

Change the name of a schema

Example:

CREATE SCHEMA tst;
ALTER SCHEMA tst RENAME TO tst2;

It is only allowed to change the name of a schema if no objects exists which depend on the schema name, such as tables, views, functions, etc.

For details see: SchemaDefinitions.

Associated system table: sys.schemas.

CREATE SEQUENCE

CREATE SEQUENCE [ schema_name . ] sequence_name
    [ AS datatype ]
    [ START WITH bigint# ]
    [ INCREMENT BY bigint# ]
    [ MINVALUE bigint# | NO MINVALUE ]
    [ MAXVALUE bigint# | NO MAXVALUE ]
    [ CACHE bigint# ]
    [ [ NO ] CYCLE ]

Define a new integer number sequence generator

For details see: SerialDataTypes.

Associated system table: sys.sequences.

CREATE TABLE

CREATE TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    ( column_definition(s)_and_optional_table-constraints_list )

Define a new table including data integrity constraints

Note: WARNING: Column CHECK constraint definitions are accepted but not enforced! They are also not stored in the data dictionary, so will be lost when using msqldump. You can also use LIKE qname as part of the column definition to copy the column definitions of qname excluding their constraints. For instance CREATE TABLE webshop.products_new (LIKE webshop.products, descr VARCHAR(9999), pict BLOB);

For details see: TableDefinitions and: TableIElements.

Associated system table: sys.tables where type = 0.

CREATE TABLE AS

CREATE TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    [ ( column_name [, column_name] [, ... ] ) ]
    AS SELECT_query
    [ WITH [ NO ] DATA ]

Define a new table from the results of a query. By default the table will be populated with the data of the query. Specify WITH NO DATA to only create the table.

Note: Default behavior is WITH DATA.

For details see: TableDefinitions and: TableIElements

CREATE TABLE FROM LOADER

CREATE TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    FROM LOADER function_name ( [ arg1_val [ , arg2_val ] [, ... ] ] )
    [ WITH [ NO ] DATA ]

Define a new table from the results of a (Python) loader function. By default the table will be populated with the data of the loader function. Specify WITH NO DATA to only create the table.

Note: This command is MonetDB specific.

For details see: Python loader

Associated system table: sys.tables where type = 0

CREATE MERGE TABLE

CREATE MERGE TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    ( column_definition(s)_and_optional_table-constraints_list )
    [ PARTITION BY { RANGE | VALUES }  { ON ( column_name )  |  USING ( expression ) } ]

Define a new merge table to create a horizontally partitioned table. A merge table logically combines the data of multiple other tables (called partition tables which are added via ALTER TABLE merge_table ADD TABLE partition_table) which all must have the exact same table definition. This merge table is easier to extend/change with new partitions than a view which combines multiple SELECT queries (via UNION ALL) and can processes queries faster. Also with "PARTITION BY" specified, the virtual merge table becomes updatable, so allow inserts, updates, deletes and truncate on the merge table directly instead of the partition tables.

Note: This command is MonetDB specific. See updatable-merge-tables for details. A merge table is removed (including all its partition table information, but not the partition tables) using the ordinary DROP TABLE statement. There is no DROP MERGE TABLE statement.

For details see: TableDataPartitioning and updatable-merge-tables and: TableDefinitions.

Associated system tables: sys.tables where type = 3; sys.table_partitions.

CREATE REMOTE TABLE

CREATE REMOTE TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    ( column definition(s) )
    ON `'mapi:monetdb://host:port/dbname'`
    [ WITH [ USER 'user_login_name_nm' ]   [ [ ENCRYPTED ] PASSWORD 'password' ] ]

Define an alias for a remote table. The remote table must be an existing table on another running MonetDB server The definition of the remote table structure must match exactly the definition of its counterpart in the remote database, so the same schema name, same table name, same column names and same column data types. The format of the remote server URL must conform to: 'mapi:monetdb://**_host_:_port_/_dbname_**', where all three parameters (host, port and dbname) must be specified.

Note: This command is MonetDB specific. See this blog post for more information. A remote table definition is removed using the ordinary DROP TABLE statement. There is no DROP REMOTE TABLE statement.

For details see: DistributedQueryProcessing and: TableDefinitions.

Associated system table: sys.tables where type = 5

CREATE REPLICA TABLE

CREATE REPLICA TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    ( column_definition(s)_and_optional_table-constraints_list )

Define a new replica table

Note: This command is MonetDB specific. A replica table is removed using the ordinary DROP TABLE statement. There is no DROP REPLICA TABLE statement.

For details see: TableDefinitions and: TableElements.

CREATE UNLOGGED TABLE

CREATE UNLOGGED TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    ( column_definition(s)_and_optional_table-constraints_list )

Define a new unlogged table including data integrity constraints. Unlogged tables do not have their changes written to the WAL. Therefore committing table changes to an unlogged table benefit from an absence of I/O since nothing is written to the WAL and therefore these commit actions can be relatively very fast. Unlogged tables differ from global temporary tables in the fact that the unlogged table content is the same for each user.

Note: This command is MonetDB specific. An unlogged table is removed using the ordinary DROP TABLE statement. There is no DROP UNLOGGED TABLE statement.

For details see: TableDefinitions and: TableElements.

CREATE TEMPORARY TABLE

CREATE [ LOCAL | GLOBAL ] { TEMPORARY | TEMP } TABLE [ IF NOT EXISTS ] [ schema_name . ] table_name
    { ( column_definition(s)_and_optional_table-constraints_list )  |
      [ ( column_name [, column_name ] [, ... ] ) ] AS SELECT_query [ WITH [ NO ] DATA ] }
    [ ON COMMIT { DELETE ROWS | PRESERVE ROWS | DROP } ]

Define a new temporary table. The visibility of the table to other session users can be controlled by using GLOBAL. Default is LOCAL.
A LOCAL temporary table will be removed automatically after the user session is terminated.
A GLOBAL temporary table will be visible and usable by other users and sessions and remain in the system catalog even after a server shutdown but each session will have its own data and state not visible or accessable by other sessions or users.
When ON COMMIT clause is not specified then the default behavior is ON COMMIT DELETE ROWS, complying to the SQL standard.
When using AS SELECT ... the default is WITH DATA.

Example:

CREATE TEMP TABLE names (id int NOT NULL PRIMARY KEY, name VARCHAR(99) NOT NULL UNIQUE) ON COMMIT PRESERVE ROWS;
-- Note that temporary tables are implicitly assigned to schema: tmp
INSERT INTO tmp.names VALUES (1, 'one');
INSERT INTO tmp.names VALUES (2, 'two');
INSERT INTO tmp.names VALUES (2, 'dos');
-- Error: INSERT INTO: PRIMARY KEY constraint 'names.names_id_pkey' violated
INSERT INTO tmp.names VALUES (3, 'two');
-- Error: INSERT INTO: UNIQUE constraint 'names.names_name_unique' violated
INSERT INTO tmp.names VALUES (3, 'free');
SELECT * FROM tmp.names;
-- shows 3 rows
DROP TABLE tmp.names;

CREATE GLOBAL TEMP TABLE tmp.name_lengths (name, length)
 AS SELECT DISTINCT name, LENGTH(name) FROM sys.ids ORDER BY 1
 WITH DATA
 ON COMMIT PRESERVE ROWS;
SELECT * FROM tmp.name_lengths WHERE name ILIKE '%\\_id%' ESCAPE '\\';
SELECT COUNT(*) AS count_names, AVG(length) AS avg_name_length FROM tmp.name_lengths;
DROP TABLE tmp.name_lengths;

IMPORTANT: specify ON COMMIT PRESERVE ROWS to keep rows when working in autocommit mode, because default behavior is ON COMMIT DELETE ROWS. It is not possible to add comments on temporary tables or columns thereof. A temporary table is removed using the ordinary DROP TABLE statement. There is no DROP TEMPORARY TABLE statement.

For details see: TableDefinitions and: TableElements.

CREATE INDEX

CREATE [ UNIQUE ] INDEX index_name ON [ schema_name . ] table_name ( column_name [, column_name ] [, ... ] )

Define a new secondary index on one or more columns of a specific table

Note: Although CREATE INDEX commands are accepted by the MonetDB parser for SQL compliance purposes, it currently does not create a physical secondary index via this SQL command. Instead MonetDB internally decides which column search accelerator(s) to create, persist and use during SQL query execution. The index name must be unique within the schema of the table. You can not specify the schema for the index. It will be placed in the same schema as the table. WARNING: the UNIQUE keyword does NOT enforce a uniqueness constraint. To create a unique constraint use: ALTER TABLE s.t ADD CONSTRAINT t_uc UNIQUE (c1, c2) instead.

For details see: IndexDefinitions

Associated system table: sys.idxs

CREATE IMPRINTS INDEX

CREATE IMPRINTS INDEX index_name ON [ schema_name . ] table_name ( column_name )

On numerical columns it creates an index which stores meta data (min, max, nulls) on segments of column data. An imprint is used during query evaluation to limit data access and thus minimize memory traffic. It can speedup queries which have a column selection condition (such as: AGE IS NULL OR AGE BETWEEN 25 AND 65). The storage overhead is just a few percent over the size of the columns being indexed.

On string columns it creates an index that speeds up LIKE queries by using a fast pre-filtering algorithm. It can only be created on read only tables (use the syntax ALTER TABLE foo SET READ ONLY to mark table foo as read only), because the creation operation is expensive.

Example:

CREATE IMPRINTS INDEX my_impr_idx ON myschema.mytable ( my_num_column );

Note: This command is MonetDB specific.

The imprints index is a new type of experimental column index.

Limitations are: Only 1 column can be indexed per index. The index name must be unique within the schema of the table. You can not specify the schema for the index. It will be placed in the same schema as the table. For string columns the index can only be created on read only tables.

Warning: The index is not maintained automatically and will become inactive after inserts, deletes or updates are done on the column data. An imprints index is removed using the ordinary DROP INDEX statement. There is no DROP IMPRINTS INDEX statement.

For details see: IndexDefinitions

Associated system table: sys.idxs, sys.storage

CREATE ORDERED INDEX

CREATE ORDERED INDEX index_name ON [ schema_name . ] table_name ( column_name )

Define a new ordered index on one column of a specific table. This index is a special single column index where the values are stored in ascending order. It can speedup queries which have a column selection condition (such as: AGE >=18 or AGE BETWEEN 18 AND 30) or need sorting such as when GROUP BY is used.

Example:

CREATE ORDERED INDEX my_ord_idx ON myschema.mytable ( my_column );

Note: This command is MonetDB specific. The ordered index is a new type of experimental column index.

Limitations: Only 1 column can be indexed per index. The index name must be unique within the schema of the table. You can not specify the schema for the index. It will be placed in the same schema as the table. Releases before Mar2018 (11.29.3) only allowed columns of fixed size data type (so not on: char, varchar, clob, blob, url, json, inet and uuid) could be indexed.

Warning: The index is not maintained automatically and will become inactive after inserts, deletes or updates are done on the column data. A ordered index is removed using the ordinary DROP INDEX statement. There is no DROP ORDERED INDEX statement.

For details see: IndexDefinitions

Associated system table: sys.idxs, sys.storage

CREATE VIEW

CREATE [ OR REPLACE ] VIEW [ schema_name . ] view_name
    [ ( column_name [, column_name ] [, ... ] ) ]
    AS SELECT_query
    [ WITH CHECK OPTION ]

Define a new SQL view. A view is a virtual table based on the result set of a stored SELECT query. A view does not physically store data. It is useful to reduce query complexity as it can include joins, computations, unions, aggregations. It can increase standardisation and reusability and be used to control data access, provide an abstraction layer between applications and physical tables, simplify reporting.

Limitation: Views are not updatable. The "WITH CHECK OPTION" is accepted for compliance but has no effect. Recursive views and reference-able views are not supported. Note: An "ORDER BY" clause in the SELECT-query is supported.

For details see: ViewDefinitions

Associated system table: sys.tables where type = 1

CREATE AGGREGATE EXTERNAL

CREATE [ OR REPLACE ] AGGREGATE [ FUNCTION ] [ schema_name . ] aggregate_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    EXTERNAL NAME  MAL_function_name

Define a new user-defined aggregation function for which the implementation is specified externally using MAL and C

Example:

CREATE AGGREGATE quantile(val bigint, q double) RETURNS bigint EXTERNAL NAME "aggr"."quantile";

Note: This command is MonetDB specific. External implies language MAL. To allow other users to invoke a user-defined aggregate function, you must grant the other users (or PUBLIC) EXECUTE privilege for the aggregate function.

For built-in aggregate functions see: AggregateFunctions

Associated system table: sys.functions where type = 3 and language = 1

CREATE AGGREGATE LANGUAGE

CREATE [ OR REPLACE ] AGGREGATE [ FUNCTION ] [ schema_name . ] aggregate_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    LANGUAGE { C | CPP | R | PYTHON | PYTHON_MAP | PYTHON3 | PYTHON3_MAP }
    '{' function_body '}'

Define a new user-defined aggregation function for which the body implementation is specified in the specific script language

Example:

CREATE AGGREGATE python_aggregate(val INTEGER)
RETURNS INTEGER
LANGUAGE PYTHON {
    try:
        unique = numpy.unique(aggr_group)
        x = numpy.zeros(shape=(unique.size))
        for i in range(0, unique.size):
            x[i] = numpy.sum(val[aggr_group==unique[i]])
    except NameError:
        # aggr_group doesn't exist. no groups, aggregate on all data
        x = numpy.sum(val)
    return(x)
};

Note: This command is MonetDB specific. Supported languages are: C, C++, R and Python. If your Python code requires Python 3 to work correctly use PYTHON3 instead of PYTHON. If your Python code can be executed in parallel (using multiple threads) without side effects, use PYTHON_MAP instead of PYTHON. Idem for PYTHON3_MAP. Note: Python 2 and the language keywords PYTHON2 and PYTHON2_MAP are no longer supported. For languages C and CPP a C/C++ compiler must be available on the deployment server and the MonetDB server started with option: --set embedded_c=true. For language R the R script interpreter software must be available on the deployment server and the MonetDB server started with option: --set embedded_r=true. For language PYTHON the Python script interpreter software must be available on the deployment server and the MonetDB server started with option: --set embedded_py=true or --set embedded_py=3. To allow other users to invoke a user-defined aggregate function, you must grant the other users (or PUBLIC) EXECUTE privilege for the aggregate function.

For details see: JIT C/C++ UDFs and embedded pythonnumpy and embedded-r-monetdb

Associated system table: sys.functions where type = 3 and language > 2; sys.function_languages

CREATE FUNCTION

CREATE [ OR REPLACE ] FUNCTION [ schema_name . ] function_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    BEGIN function_body END

Define a new user-defined function

Example:

CREATE FUNCTION heapspace(tpe string, i bigint, w int) returns bigint
begin
 if tpe <> 'varchar' and tpe <> 'clob' then return 0;
 end if;
 return 10240 + i * w;
end;

Note: Besides returning a scalar value (type = 1), functions can also be defined to return a Table as data type (type = 5). To allow other users to invoke a user-defined function, you must grant the other users (or PUBLIC) EXECUTE privilege for the function.

For built-in functions see: FunctionsAndOperators

Associated system table: sys.functions where type in (1,5) and language = 2

CREATE FUNCTION EXTERNAL

CREATE [ OR REPLACE ] FUNCTION [ schema_name . ] function_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    EXTERNAL NAME  MAL_function_name

Define a new user-defined function for which the implementation is specified externally using MAL and C

Example:

CREATE FUNCTION isa_uuid(s string) RETURNS boolean EXTERNAL NAME uuid."isaUUID";

CREATE OR REPLACE FUNCTION pcre_match(s string, pattern string) RETURNS boolean EXTERNAL NAME pcre."match";
CREATE OR REPLACE FUNCTION pcre_imatch(s string, pattern string) RETURNS boolean EXTERNAL NAME pcre."imatch";
CREATE OR REPLACE FUNCTION pcre_replace(s string, pattern string, repl string, flags string)
  RETURNS string EXTERNAL NAME pcre."replace";
CREATE OR REPLACE FUNCTION pcre_replacefirst(s string, pattern string, repl string, flags string)
  RETURNS string EXTERNAL NAME pcre."replace_first";

Note: This command is MonetDB specific. External implies language MAL. Besides returning a scalar value (type = 1), functions can also be defined to return a Table as data type (type = 5). To allow other users to invoke a user-defined function, you must grant the other users (or PUBLIC) EXECUTE privilege for the function. The pcre example functions are copied from use PCRE pattern matching.

For built-in functions see: FunctionsAndOperators and: UserDefinedFunctions

Associated system table: sys.functions where type in (1,5) and language = 1

CREATE FUNCTION LANGUAGE

CREATE [ OR REPLACE ] FUNCTION [ schema_name . ] function_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    LANGUAGE { C | CPP | R | PYTHON | PYTHON_MAP | PYTHON3 | PYTHON3_MAP }
    '{' function_body '}'

Define a new user-defined function for which the implementation is specified in a specific script language

Note: This command is MonetDB specific. Supported languages are: C, C++, R and Python. If your Python code requires Python 3 to work correctly use PYTHON3 instead of PYTHON. If your Python code can be executed in parallel (using multiple threads) without side effects, use PYTHON_MAP instead of PYTHON. Idem for PYTHON3_MAP. Note: Python 2 and the language keywords PYTHON2 and PYTHON2_MAP are no longer supported. For languages C and CPP a C/C++ compiler must be available on the deployment server and the MonetDB server started with option: --set embedded_c=true. For language R the R script interpreter software must be available on the deployment server and the MonetDB server started with option: --set embedded_r=true. For language PYTHON the Python script interpreter software must be available on the deployment server and the MonetDB server started with option: --set embedded_py=true or --set embedded_py=3. Besides returning a scalar value (type = 1), functions can also be defined to return a Table as data type (type = 5). To allow other users to invoke a user-defined function, you must grant the other users (or PUBLIC) EXECUTE privilege for the function.

For details see: JIT C/C++ UDFs and embedded pythonnumpy-monetdb and embedded-r-monetdb and voter-classification-using-monetdbpython.

Associated system table: sys.functions where type in (1,5) and language > 2; sys.function_languages.

CREATE FILTER FUNCTION EXTERNAL

CREATE [ OR REPLACE ] FILTER [ FUNCTION ] [ schema_name . ] function_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    EXTERNAL NAME  MAL_function_name

Define a new user-defined filter function for which the implementation is specified externally using MAL and C

Example:

CREATE FILTER FUNCTION "re_like"(val string, pat string) external name algebra."rexpr_like";

Note: This command is MonetDB specific. External implies language MAL. To allow other users to invoke a user-defined filter function, you must grant the other users (or PUBLIC) EXECUTE privilege for the filter function.

Associated system table: sys.functions where type = 4 and language = 1.

CREATE LOADER

CREATE [ OR REPLACE ] LOADER [ FUNCTION ] [ schema_name . ] function_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    LANGUAGE PYTHON
    '{' _python_code_with_emit.emit()function '}'

Define a new user-defined loader function for which the implementation is done in Python language. A loader function can for instance read data from an external file is a specific format such as XML, json, bson, ods, xlsx, etc.

Example:

CREATE LOADER json_loader(filename STRING) LANGUAGE PYTHON {
    import json
    f = open(filename)
    emit.emit(json.load(f))
    f.close()
};

Note: This command is MonetDB specific. For language PYTHON the Python script interpreter software must be available on the deployment server and the MonetDB server started with option: --set embedded_py=true or --set embedded_py=3. To allow other users to invoke a user-defined loader function, you must grant the other users (or PUBLIC) EXECUTE privilege for the loader function.

For details see: monetdbpython-loader.

Associated system table: sys.functions where type = 7 and language > 2.

CREATE PROCEDURE

CREATE [ OR REPLACE ] PROCEDURE [ schema_name . ] procedure_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    BEGIN procedure_body END

Define a new user-defined procedure

Note: To allow other users to call and execute a user-defined procedure, you must grant the other users (or PUBLIC) EXECUTE privilege for the procedure.

For details see: Procedures.

Associated system table: sys.functions where type = 2 and language = 2.

CREATE PROCEDURE EXTERNAL

CREATE [ OR REPLACE ] PROCEDURE [ schema_name . ] procedure_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    EXTERNAL NAME  MAL_procedure_name

Define a new user-defined procedure for which the implementation is specified externally using MAL and C

Example:

CREATE PROCEDURE sys.createorderindex(sys string, tab string, col string) external name sql.createorderindex;

Note: This command is MonetDB specific. External implies language MAL. To allow other users to call and execute a user-defined procedure, you must grant the other users (or PUBLIC) EXECUTE privilege for the procedure.

For details see:Procedures.

Associated system table: sys.functions where type = 2 and language = 1.

CREATE WINDOW EXTERNAL

CREATE [ OR REPLACE ] WINDOW [ FUNCTION ] [ schema_name . ] window_name ( [ arg1_nm_type [ , arg2_nm_type ] [, ... ] ] )
    RETURNS datatype
    EXTERNAL NAME  MAL_function_name

Define a new user-defined window function for which the implementation is specified externally using MAL and C

Example:

CREATE OR REPLACE WINDOW stddev(val bigint) RETURNS double EXTERNAL NAME "sql"."stdevp";

Note: This command is MonetDB specific. External implies language MAL. To allow other users to invoke a user-defined window function, you must grant the other users (or PUBLIC) EXECUTE privilege for the window function.

For built-in window functions see: WindowFunctions.

Associated system table: sys.functions where type = 6 and language = 1.

CREATE TYPE EXTERNAL

CREATE TYPE [ schema_name . ] type_name
    EXTERNAL NAME  MAL type_name

Declare a new user-defined data type. The implementation (structure, operators & functions both scalar and bulk) must be specified externally in C code and MAL script. For examples see the C implementations of data types: inet, json, url and uuid.

Note: This command is MonetDB specific. External implies language MAL.

For details see: UserDefinedTypes

CREATE TRIGGER

CREATE [ OR REPLACE ] TRIGGER trigger_name
    { BEFORE | AFTER }
    { INSERT | DELETE | TRUNCATE | UPDATE [ OF column_name [, column_name] [, ... ] ] }
    ON [ schema_name . ] table_name
    [ REFERENCING { { OLD | NEW } { [ ROW ] | TABLE } [ AS ] ident } [...] ]
    [ FOR [ EACH ] { ROW | STATEMENT } ]
    [ WHEN ( search_condition ) ]
    { trigger_procedure_statement | BEGIN ATOMIC trigger_procedure_statement_list END }

Define a new trigger on a table update event

Note: FOR EACH STATEMENT is the default if not specified. The option to specify a schema name for the trigger name has been removed. Previous the schema name of a full qualified trigger name already had to be the same as the schema name of the table.

For details see: Triggers.

Associated system table: sys.triggers

COMMENT ON SCHEMA

COMMENT ON SCHEMA schema_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a schema

Example:

COMMENT ON SCHEMA prj4 IS 'schema of new project 4';
COMMENT ON SCHEMA prj0 IS '';
COMMENT ON SCHEMA prjX IS NULL;

Note: By specifying IS NULL or IS '' you remove the comment for the schema. If the schema is dropped, the associated comment is also removed.

COMMENT ON TABLE

COMMENT ON TABLE [ schema_name . ] table_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a table

Example:

COMMENT ON TABLE sys.comments IS 'contains comments on all db objects'

Note: By specifying IS NULL or IS '' you remove the comment for the table object. If the table is dropped, the associated comment (including the comments for the columns) is also removed. Note: it is not allowed or possible to add comments for temporary tables in schema "tmp".

COMMENT ON VIEW

COMMENT ON VIEW [ schema_name . ] view_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a view

Example:

COMMENT ON VIEW mysch.articles_aggr IS 'view lists aggregated info on articles'

Note: By specifying IS NULL or IS '' you remove the comment for the view. If the view is dropped, the associated comment (including the comments for the columns) is also removed.

COMMENT ON COLUMN

COMMENT ON COLUMN [ schema_name . ] table_or_view_name . column_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a column of a table or view

Example:

COMMENT ON COLUMN sys.comments.remark IS 'contains description text'

Note: By specifying IS NULL or IS '' you remove the comment for the column. If the column (or table or view) is dropped, the associated comment is also removed. Note: it is not allowed or possible to add comments for columns of temporary tables in schema "tmp".

Associated system table: sys.comments

COMMENT ON INDEX

COMMENT ON INDEX [ schema_name . ] index_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for an index

Example:

COMMENT ON INDEX mysch.article_id IS 'unique index of id key column of article table'

Note: By specifying IS NULL or IS '' you remove the comment for the index. If the index is dropped, the associated comment is also removed. Note: it is not allowed or possible to add comments for indexes of temporary tables in schema "tmp".

COMMENT ON SEQUENCE

COMMENT ON SEQUENCE [ schema_name . ] sequence_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a sequence

Example:

COMMENT ON SEQUENCE mysch.article_id_seq IS 'sequence for article id column'

Note: By specifying IS NULL or IS '' you remove the comment for the sequence. If the sequence is dropped, the associated comment is also removed.

Associated system table: sys.comments

COMMENT ON FUNCTION

COMMENT ON FUNCTION [ schema_name . ] function_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a function

Example:

COMMENT ON FUNCTION sys.upper IS 'converts text into uppercase'

Note: By specifying IS NULL or IS '' you remove the comment for the function. If the function is dropped, the associated comment is also removed.

See also: CREATE FUNCTION, DROP FUNCTION.

Associated system table: sys.comments

COMMENT ON PROCEDURE

COMMENT ON PROCEDURE [ schema_name . ] procedure_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a procedure

Example:

COMMENT ON PROCEDURE mysch.load_articles IS 'proc which reloads the articles from external file article.csv'

Note: By specifying IS NULL or IS '' you remove the comment for the procedure. If the procedure is dropped, the associated comment is also removed.

See also: CREATE PROCEDURE, DROP PROCEDURE.

Associated system table: sys.comments.

COMMENT ON AGGREGATE

COMMENT ON AGGREGATE [ schema_name . ] aggregate_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for an aggregate function

Example:

COMMENT ON AGGREGATE sys.std_dev IS 'computes the standard deviation of a group of numeric values'

Note: By specifying IS NULL or IS '' you remove the comment for the aggregate function. If the aggregate function is dropped, the associated comment is also removed.

Associated system table: sys.comments.

COMMENT ON FILTER FUNCTION

COMMENT ON FILTER FUNCTION [ schema_name . ] function_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a filter function

Example:

COMMENT ON FILTER FUNCTION sys."ilike"(clob, clob) IS 'case insensitive pattern matching';
COMMENT ON FILTER FUNCTION sys."ilike"(clob, clob, clob) IS 'case insensitive pattern matching with user specified escape character';

Note: By specifying IS NULL or IS '' you remove the comment for the filter function. If the filter function is dropped, the associated comment is also removed.

Associated system table: sys.comments.

COMMENT ON LOADER

COMMENT ON LOADER [ schema_name . ] function_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a loader function

Example:

COMMENT ON LOADER mysch.load_xls_data IS 'custom loader to extract data from external xls file'

Note: By specifying IS NULL or IS '' you remove the comment for the loader function. If the loader function is dropped, the associated comment is also removed.

COMMENT ON WINDOW

COMMENT ON WINDOW [ FUNCTION ] [ schema_name . ] window_name IS  { 'comment text' | NULL | '' }

Add or update or remove a comment for a window function

Example:

COMMENT ON WINDOW FUNCTION sys.stddev IS 'computes the standard deviation of a group of numeric values'

Note: By specifying IS NULL or IS '' you remove the comment for the window function. If the window function is dropped, the associated comment is also removed.

Associated system table: sys.comments.

DECLARE

DECLARE [ schema_name . ] variable_name [, ... ] datatype

Declared a new variable or list of variables of the same type

Example:

DECLARE ts1 timestamp;
SET ts1 = now();
SELECT ts1;
SELECT * FROM sys.var() WHERE name NOT IN (SELECT var_name FROM sys.var_values);

Note: The declared variable is not persistent. It will be lost after closing the connection or session.

For details see: Variables.

ALTER SEQUENCE

ALTER SEQUENCE [ schema_name . ] sequence_name [ AS datatype  ]
    [ RESTART [WITH bigint# ] ]
    [ INCREMENT BY bigint# ]
    [ MINVALUE bigint# | NO MINVALUE ]
    [ MAXVALUE bigint# | NO MAXVALUE ]
    [ CACHE bigint# ]
    [ [ NO ] CYCLE ]

Change definition of a sequence generator

For details see: SerialDatatypes

See also: DROP SEQUENCE, CREATE SEQUENCE.

Associated system table: sys.sequences.

ALTER TABLE ADD COLUMN

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    ADD [ COLUMN ] column_name { data_type [
    column_option ... ] | SERIAL | BIGSERIAL }

Add a column to a table

For details see: AlterStatement.

Associated system table: sys.columns.

ALTER TABLE ALTER COLUMN

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    ALTER [ COLUMN ] column_name { SET NULL | SET NOT NULL | SET DEFAULT value
    | DROP DEFAULT | SET STORAGE {string | NULL} }

Change column nullability or default value or storage

Note: Change of the data type of a column is not supported. Instead use command sequence:

  ALTER TABLE tbl ADD COLUMN new_column new_data_type;
  UPDATE tbl SET new_column = CONVERT(old_column, new_data_type);
  ALTER TABLE tbl DROP COLUMN old_column RESTRICT;
  ALTER TABLE tbl RENAME COLUMN new_column TO old_column;

For details see: []AlterStatement](/Documentation/SQLreference/TableDefinitions/AlterStatement)

ALTER TABLE DROP COLUMN

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    DROP [ COLUMN ] column_name
    [ RESTRICT | CASCADE ]

Remove a column from a table

Note: You cannot drop a column if it is referenced (e.g. from a view, an index, a merge table, a trigger, a foreign key constraint, a function or procedure or another db object except comments). Use option CASCADE to specify to also drop those referencing objects.

For details see: AlterStatement.

Associated system table: sys.columns.

ALTER TABLE ADD CONSTRAINT

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    ADD [ CONSTRAINT constraint_name ]
    { PRIMARY KEY ( column_name [ , column_name ] [, ... ] )
    |      UNIQUE ( column_name [ , column_name ] [, ... ] )
    | FOREIGN KEY ( column_name [ , column_name ] [, ... ] ) REFERENCES [ schema_name . ] table_name
        [ ( column_name [ , column_name ] [, ... ] ) ]   [ match_options ]   [ ref_actions ]
    }

Add a table constraint to a table

Examples:

ALTER TABLE "tblnm" ADD PRIMARY KEY ("C1_id");
ALTER TABLE if exists "schnm"."tblnm" ADD CONSTRAINT "tblnm_uc" UNIQUE ("name", "desc");
ALTER TABLE "tblnm" ADD CONSTRAINT "tblnm_fk1" FOREIGN KEY ("f_id", "f_seq")
                        REFERENCES "schnm2"."fun" ("id", "seq")  ON UPDATE RESTRICT  ON DELETE CASCADE;

Note: Only one PRIMARY KEY constraint can be defined per table. When a primary key constraint is added, all the primary key columns will become NOT NULLable implicitly. If no constraint_name is specified a constraint_name will be composed implicitly from the table name, column name(s) and constraint type. The CHECK constraint is not (yet) supported.

For details see: AlterStatement.

Associated system table: sys.keys.

ALTER TABLE DROP CONSTRAINT

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    DROP CONSTRAINT  constraint_name
    [ RESTRICT | CASCADE ]

Remove a table/column constraint from a table

Note: You cannot drop a constraint if it is referenced (e.g. from a foreign key constraint). Use option CASCADE to specify to also drop those referencing objects. To remove a NOT NULL column constraint use: ALTER TABLE sch.tbl ALTER COLUMN column_name SET NULL.

For details see: AlterStatement.

Associated system table: sys.keys.

ALTER TABLE RENAME TO

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    RENAME TO  new_table_name

Change the name of a table

Note: It is only allowed to change the name of a table if no objects exists which depends on the table name, such as foreign key constraints, views, triggers, indices, functions, procedures, etc. To move a table to s different schema use command: ALTER TABLE ... SET SCHEMA ...

For details see: AlterStatement, See also: CREATE TABLE AS, ALTER TABLE SET SCHEMA.

Associated system table: sys.tables.

ALTER TABLE RENAME COLUMN

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    RENAME [ COLUMN ]  column_name TO  new_column_name

Change the name of a column

Note: It is only allowed to change the name of a column if no objects exists which depends on the column name, such as constraints, views, functions, etc.

For details see: AlterStatement.

Associated system table: sys.columns.

ALTER TABLE SET SCHEMA

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name
    SET SCHEMA  new_schema_name

Change the schema name of a table

Note: It is only allowed to change the schema name of a table if no objects exists which depends on the table name, such as foreign key constraints, views, triggers, indices, functions, procedures, etc.

For details see: AlterStatement.

Associated system table: sys.tables.

ALTER TABLE ADD TABLE

ALTER TABLE [ IF EXISTS ] [ schema_name . ] merge_table_name
    ADD TABLE [ schema_name . ] table_name
    [ AS PARTITION  partition_spec ]

partition_spec:

    IN ( expression [ , expression ] [, ... ] )  [ WITH NULL VALUES ]
    | FROM  { RANGE MINVALUE | expression }  TO  { RANGE MAXVALUE | expression }  [ WITH NULL VALUES ]
    | FOR NULL VALUES

Add a table reference to a merge table set optionally with an partitioning specification

Note: This command is MonetDB specific. Limitations: The added table must have the same column definitions and layout as the merge table. Only user defined tables and merge tables can be added to a merge table set. When the merge table was created with a PARTITION BY clause, the AS PARTITION clause must be specified.

For details see: DataPartitioning and Updatable-merge-tables and: AlterStatement.

Associated system tables: sys.tables where type = 3; sys.range_partitions; ; sys.value_partitions;.

ALTER TABLE SET TABLE

ALTER TABLE [ IF EXISTS ] [ schema_name . ] merge_table_name
    SET TABLE [ schema_name . ] table_name
    AS PARTITION  partition_spec

partition_spec:

IN ( expression [ , expression ] [, ... ] )  [ WITH NULL VALUES ]
    | FROM  { RANGE MINVALUE | expression }  TO  { RANGE MAXVALUE | expression }  [ WITH NULL VALUES ]
    | FOR NULL VALUES

Change the partitioning specification of a partition table

Note: This command is MonetDB specific.

For details see: Updatable-merge-tables and AlterStatement

Associated system tables: sys.tables where type = 3; sys.range_partitions;, sys.value_partitions;.

ALTER TABLE DROP TABLE

ALTER TABLE [ IF EXISTS ] [ schema_name . ] merge_table_name
    DROP TABLE [ schema_name . ] table_name
    [ RESTRICT | CASCADE ]

Remove a table reference from a merge table set. The partition table itself will not be dropped.

Note: This command is MonetDB specific.

For details see: DataPartitioning and: AlterStatement.

Associated system tables: sys.tables where type = 3; sys.range_partitions;, sys.value_partitions;.

ALTER TABLE SET INSERT ONLY

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name SET INSERT ONLY

Change access of a table to allow only inserts

For details see: AlterStatement. See also: ALTER TABLE SET READ ONLY ALTER TABLE SET READ WRITE

Associated system table: sys.tables where type in (0, 3, 4, 5, 6).

ALTER TABLE SET READ ONLY

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name SET READ ONLY

Change access of a table to allow only reads (select queries)

For details see: AlterStatement.

Associated system table: sys.tables.

ALTER TABLE SET READ WRITE

ALTER TABLE [ IF EXISTS ] [ schema_name . ] table_name SET READ WRITE

Restore access of a table to allow inserts, updates, deletes and reads

For details see: AlterStatement.

Associated system table: sys.tables where type in (0, 3, 4, 5, 6).

DROP SCHEMA

DROP SCHEMA [ IF EXISTS ] schema_name [ RESTRICT | CASCADE ]

Remove a database schema, potentially including all its dependent objects

Example:

DROP SCHEMA IF EXISTS "my_project" RESTRICT;

Note: You cannot drop a schema if it contains objects (e.g. tables, views, functions or procedures, except comments). Use option CASCADE to specify to also drop those referencing objects. The default behavior is RESTRICT. System schemas (sys, tmp, profiler, json) can not be dropped as they are needed by the system.

For details see: Schema.

Associated system table: sys.schemas.

DROP SEQUENCE

DROP SEQUENCE [ schema_name . ] sequence_name

Remove an existing sequence generator

Note: You cannot drop a sequence if it is referenced from another object e.g. from a column, a function or procedure.

For details see: SerialDatatypes. and: DropStatement.

See also: ALTER SEQUENCE, CREATE SEQUENCE.

Associated system table: sys.sequences

DROP TABLE

DROP TABLE [ IF EXISTS ] [ schema_name . ] table_name [ RESTRICT | CASCADE ]

Remove a table, potentially including all its dependent objects

Example:

DROP TABLE IF EXISTS "my_project"."my_Table" CASCADE;

Note: You cannot drop a table if it is referenced from a view, a merge table, a trigger, a foreign key constraint, a function, a procedure. Use option CASCADE to specify to also drop those referencing objects. Objects which are part of the table such as columns, pkey/unique/fkey constraints, indices, comments, table_partitions, range_partitions and value_partitions are removed also when a table is dropped. Warning: When dropping a merge table, also all the related table partitioning information (in sys.table_partitions, sys.range_partitions and sys.value_partitions) is removed. System tables can also not be dropped as they are needed by the system.

For details see: DataPartitioning, and: DropStatement.

DROP INDEX

DROP INDEX [ schema_name . ] index_name

Remove an existing table index

Example:

DROP TABLE "my_project"."my_Index";

For details see: DropStatement.

Associated system table: sys.idxs.

DROP VIEW

DROP VIEW [ IF EXISTS ] [ schema_name . ] view_name [ RESTRICT | CASCADE ]

Remove a view

Example:

DROP VIEW IF EXISTS "my_project"."my_View" CASCADE;

Note: You cannot drop a view if it is referenced (e.g. from another view, a function or procedure or another db object except comments). Use option CASCADE to specify to also drop those referencing objects. System views can also not be dropped as they are needed by the system.

For details see: DropStatement.

DROP AGGREGATE

DROP AGGREGATE [ FUNCTION ] [ IF EXISTS ] [ schema_name . ] aggregate_function_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined aggregation function. If multiple aggregate functions exist with the same name, supply the full signature.

Example:

DROP AGGREGATE testaggr(int, double);

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects. System aggregates can not be dropped as they are part by the system.

For details see: DropStatement.

Associated system table: sys.functions where type = 3.

DROP ALL AGGREGATE

DROP ALL AGGREGATE [ FUNCTION ] [ schema_name . ] aggregate_function_name [ RESTRICT | CASCADE ]

Remove all user-defined aggregation functions which share the same name but have different signatures.

Example:

DROP ALL AGGREGATE testaggr;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type = 3.

DROP FUNCTION

DROP FUNCTION [ IF EXISTS ] [ schema_name . ] function_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined function. If multiple functions exist with the same name, supply the full signature.

Example:

DROP FUNCTION testfun(int, double);

Note: Use option CASCADE to specify to also drop referencing objects. System functions can not be dropped as they are part by the system.

For details see: DropStatement.

Associated system table: sys.functions where type in (1,5).

DROP ALL FUNCTION

DROP ALL FUNCTION [ schema_name . ] function_name [ RESTRICT | CASCADE ]

Remove all user-defined functions which share the same name but have different signatures.

Example:

DROP ALL FUNCTION testfun;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type in (1,5).

DROP FILTER FUNCTION

DROP FILTER [ FUNCTION ] [ IF EXISTS ] [ schema_name . ] function_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined filter function. If multiple filter functions exist with the same name, supply the full signature.

Example:

DROP FILTER FUNCTION my_like(string, varchar(100));

Note: This command is MonetDB specific. System filter functions can not be dropped as they are part by the system. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type = 4

DROP ALL FILTER FUNCTION

DROP ALL FILTER [ FUNCTION ] [ schema_name . ] function_name [ RESTRICT | CASCADE ]

Remove all user-defined filter functions which share the same name but have different signatures.

Example:

DROP ALL FILTER FUNCTION my_like;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type = 4.

DROP LOADER

DROP LOADER [ FUNCTION ] [ IF EXISTS ] [ schema_name . ] function_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined loader function. If multiple loader functions exist with the same name, supply the full signature.

Note: This command is MonetDB specific.

For details see: python-loader-functions.

Associated system table: sys.functions where type = 7 and language > 2.

DROP ALL LOADER

DROP ALL LOADER [ FUNCTION ] [ schema_name . ] function_name [ RESTRICT | CASCADE ]

Remove all user-defined loader functions which share the same name but have different signatures.

Example:

DROP ALL LOADER my_ods_loader;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

DROP PROCEDURE

DROP PROCEDURE [ IF EXISTS ] [ schema_name . ] procedure_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined procedure. If multiple procedures exist with the same name, supply the full signature.

Example:

DROP PROCEDURE testproc(int, double);

Note: Use option CASCADE to specify to also drop referencing objects. System procedures can not be dropped as they are part by the system.

For details see: DropStatement.

Associated system table: sys.functions where type = 2.

DROP ALL PROCEDURE

DROP ALL PROCEDURE [ schema_name . ] procedure_name
    [ RESTRICT | CASCADE ]

Remove all user-defined procedures which share the same name but have different signatures.

Example:

DROP ALL PROCEDURE testproc;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type = 2.

DROP WINDOW

DROP WINDOW [ FUNCTION ] [ IF EXISTS ] [ schema_name . ] window_function_name
    [ ( [ arg1_type [ , arg2_type ] [, ... ] ] ) ]
    [ RESTRICT | CASCADE ]

Remove a specific user-defined window function. If multiple window functions exist with the same name, supply the full signature.

Example:

DROP WINDOW stddev(bigint);

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects. System window functions can not be dropped as they are part by the system.

For details see: DropStatement.

Associated system table: sys.functions where type = 6 and language = 1 and not system.

DROP ALL WINDOW

DROP ALL WINDOW [ FUNCTION ] [ schema_name . ] window_function_name [ RESTRICT | CASCADE ]

Remove all user-defined window functions which share the same name but have different signatures.

Example:

DROP ALL WINDOW my_window_func;

Note: This command is MonetDB specific. Use option CASCADE to specify to also drop referencing objects.

For details see: DropStatement.

Associated system table: sys.functions where type = 6 and language = 1 and not system.

DROP TYPE

DROP TYPE [ schema_name . ] type_name [ RESTRICT | CASCADE ]

Remove a user-defined type

For details see: UserDefinedTypes.

DROP TRIGGER

DROP TRIGGER [ IF EXISTS ] [ schema_name . ] trigger_name

Remove an existing trigger

For details see: DropStatement.

SELECT

SELECT selection_list
    [ FROM table_view_subselect_function_list [ [ AS ] table_alias ] ]
    [ WINDOW window_definition_list ]
    [ WHERE condition_list ]
    [ GROUP BY grouping_list ]
    [ HAVING group conditon_list ]
    [ { UNION | INTERSECT | EXCEPT } [ ALL | DISTINCT ] [ CORRESPONDING [ BY '(' column_ref_commalist ')' ] ] SELECT_query ]
    [ ORDER BY ordering_list [ ASC | DESC ] ]
    [ LIMIT nr_of_rows ]
    [ OFFSET row_nr ]
    [ SAMPLE sample_size [ SEED integer ] ]

Execute a database query and return the resultset data rows

Example:

-- query to list all non-system tables:
SELECT tbl.id, table_type_name, sch.name AS "Schema", tbl.name as "Table"
    , (select count(*) from sys.columns where table_id = tbl.id) as nr_of_columns
  FROM sys."tables" as tbl
 INNER JOIN sys.table_types ON tbl.type = table_type_id
 INNER JOIN sys."schemas" as sch ON tbl.schema_id = sch.id
 WHERE NOT tbl.system	-- exclude system tables and views
   AND table_type_name <> 'VIEW'	-- exclude user views
 ORDER by "Schema", "Table";

-- example using window functions
SELECT id, emp_name, dep_name
     , ROW_NUMBER()           OVER (PARTITION BY dep_name ORDER BY id) AS row_number_in_frame
     , NTH_VALUE(emp_name, 2) OVER (PARTITION BY dep_name ORDER BY id) AS second_row_in_frame
     , LEAD(emp_name, 2)      OVER (PARTITION BY dep_name ORDER BY id) AS two_rows_ahead
     , SUM(salary)  OVER (PARTITION BY dep_name ORDER BY salary  ROWS BETWEEN 2 PRECEDING AND CURRENT ROW) AS sum_over_1or2or3_rows
     , SUM(salary)  OVER (PARTITION BY dep_name ORDER BY salary  GROUPS BETWEEN 1 PRECEDING AND 1 FOLLOWING) AS sum_over_groups
     , SUM(salary)  OVER (PARTITION BY dep_name ORDER BY salary  RANGE BETWEEN 100.0 PRECEDING AND 50.0 FOLLOWING) AS sum_over_range
  FROM employee
 ORDER BY dep_name, id;

-- example using (values(tuple),(tuple),...)

 from ( values(0,'cero'),(1,'uno'),(2,'dos'),(3,'tres'),(4,'cuatro'),(5,'cinco'),(6,'seis'),(7,'siete'),(8,'ocho'),(9,'nueve'),(10,'diez') ) as nr_es(nr, nm)

Note: It is also possible to select data without a FROM-clause, such as: SELECT CURRENT_DATE, (1+2) * 3, pi();

For details see: TableExpressions , WindowFunctions , Sampling .

Associated system table: sys.queue and sys.querylog_history.

SELECT INTO

SELECT selection_list
    INTO variable_list
    [ FROM table_view_subselect_function_list [ [ AS ] table_alias ] ]
    [ WINDOW window_definition_list ]
    [ WHERE condition_list ]
    [ GROUP BY grouping_list ]
    [ HAVING group conditon_list ]
    [ { UNION | INTERSECT | EXCEPT } [ ALL | DISTINCT ] [ CORRESPONDING [ BY '(' column_ref_commalist ')' ] ] SELECT_query ]
    [ ORDER BY ordering_list [ ASC | DESC ] ]
    [ LIMIT nr_of_rows ]
    [ OFFSET row_nr ]
    [ SAMPLE sample_size [ SEED integer ] ]

Execute a database query and store the resultset data in the named variables

For details see: TableExpressions , and: Monitoring.

Associated system table: sys.queue and sys.querylog_history.

WITH SELECT

WITH cte_alias AS SELECT_query
     [, cte_alias AS SELECT_query] [, ... ]
   SELECT selection_list
    [ INTO variable_list ]
    [ FROM cte_alias_table_view_subselect_function_list [ [ AS ] table_alias ] ]
    [ WINDOW window_definition_list ]
    [ WHERE condition_list ]
    [ GROUP BY grouping_list ]
    [ HAVING group conditon_list ]
    [ { UNION | INTERSECT | EXCEPT } [ ALL | DISTINCT ] [ CORRESPONDING [ BY '(' column_ref_commalist ')' ] ] SELECT_query ]
    [ ORDER BY ordering_list [ ASC | DESC ] ]
    [ LIMIT nr_of_rows ]
    [ OFFSET row_nr ]
    [ SAMPLE sample_size [ SEED integer ] ]

Execute a database query using the results of the queries defined in the WITH clause and return the resultset data rows

Note: Recursive queries are NOT supported yet.

For details see: TableExpressions.

Associated system table: sys.queue and sys.querylog_history.

INSERT VALUES

INSERT INTO [ schema_name . ] table_name
     [ ( column_name [, column_name] [, ... ] ) ]
    VALUES ( values_list )   [, ( values_list ) [, ... ] ]

Add data row(s) to an existing table

Example:

INSERT INTO "mySch"."myTab" (id, name) VALUES (1, 'a'), (2, 'b'), (3, 'c');

Note: It is also possible to add multiple rows of values in one insert statement by adding extra ", (values_list)" parts.

For details see: TableUpdates, and: LoadingBulkData.

Associated system table: sys.queue and sys.querylog_history.

INSERT SELECT

WITH cte_alias AS [SELECT_query [, cte_alias AS SELECT_query] [, ... ] ]
   INSERT INTO [ schema_name . ] table_name
     [ ( column_name [, column_name] [, ... ] ) ]
     SELECT_query

Execute a database query and add the resultset data rows into the existing table

For details see: TableUpdates.

Associated system table: sys.querylog_history.

UPDATE

WITH cte_alias AS [SELECT_query [, cte_alias AS SELECT_query] [, ... ] ]
   UPDATE [ schema_name . ] table_name [ [ AS ] table_alias ]
     SET column_name = expression_value
        [ , column_name = expression_value ] [, ... ]
     [ FROM cte_alias_table_view_subselect_function_list [ [ AS ] table_alias ] ]
     [ WHERE condition_expression ]

Change values of specific column(s) and row(s) of an existing table. If the optional WHERE clause is specified only the rows which match the condition(s) are changed.

Example:

UPDATE employee SET salary = salary * 1.07, bonus = 1200 WHERE id = 12345;

For details see: TableUpdates.

Associated system table: sys.querylog_history.

MERGE

WITH cte_alias AS [SELECT_query [, cte_alias AS SELECT_query] [, ... ] ]
   MERGE INTO [ schema_name . ] table_name [ [ AS ] target_alias ]
    USING table_or_cte_ref [ [ AS ] source_alias ]
       ON merge_search_condition
     WHEN merge_action
     [ WHEN merge_action ]

merge_action:
NOT MATCHED THEN INSERT [ (column1 [, column2 ...] ) ] [ { VALUES (value1 [, value2 ...] ) | DEFAULT VALUES } ]
   | MATCHED THEN UPDATE SET column1 = value1 [, column2 = value2 ] [, ... ]
   | MATCHED THEN DELETE

The MERGE INTO command is used to make changes in one table (target) based on values matched from another (source). It can be used to combine insert and update or insert and delete operations into one command, instead of multiple INSERT and UPDATE/DELETE commands. You must specify a merge search condition which determines whether a record will be inserted or updated/deleted.

Example:

MERGE INTO ProductTarget T
     USING ProductSource S
        ON S.ProductID = T.ProductID
     WHEN MATCHED     THEN UPDATE SET Name = S.Name, ProductNumber = S.ProductNumber, Color = S.Color
     WHEN NOT MATCHED THEN INSERT (ProductID, Name, ProductNumber, Color)
                            VALUES (S.ProductID, S.Name, S.ProductNumber, S.Color);

Limitations: Multiple WHEN MATCHED clauses or multiply WHEN NOT MATCHED clauses in a merge command are not allowed. Also WHEN MATCHED AND condition THEN ... syntax is not supported.

For details see: merge_statements_now_supported and en.wikipedia.org/wiki/Merge_(SQL).

Associated system table: sys.querylog_history.

DELETE

WITH cte_alias AS [SELECT_query [, cte_alias AS SELECT_query] [, ... ] ]
   DELETE FROM [ schema_name . ] table_name [ [ AS ] table_alias ]
     [ WHERE condition_expression ]

Remove data row(s) from an existing table. If the optional WHERE clause is specified only the rows which match the condition(s) are removed.

Example:

DELETE FROM web.log WHERE "timestamp" <= '2016-12-23 23:59:59';

For details see: Documentation/SQLreference/Updates.

TRUNCATE

TRUNCATE [ TABLE ] [ schema_name . ] table_name
    [ CONTINUE IDENTITY | RESTART IDENTITY ]
    [ RESTRICT | CASCADE ]

Remove all data row(s) from an existing table quickly

Example:

TRUNCATE TABLE mysch.imp_article CONTINUE IDENTITY CASCADE;

Note: The option RESTART IDENTITY can be used to reset the sequence start value of an identity column for new data inserts after the truncate. Default behavior is to CONTINUE IDENTITY sequence numbering. The CASCADE option instructs to truncate referencing table(s) also if the referencing table(s) have foreign key references to this table. The default behavior is RESTRICT. Note: it is possible to use TRUNCATE statements in a transaction and thus to rollback the effects of a truncate.

For details see: TableUpdates.

CALL

CALL [ schema_name . ] procedure_name ( [ arg1_val [ , arg2_val ] [, ... ] ] )

Execute a stored procedure

Example:

CALL sys."settimeout"(3000);
CALL sys.hot_snapshot(R'D:\MonetDB\Backups\demodb.tar.gz');

Note: The current user must have EXECUTE privilege for the called procedure.

For details see: Flow of Control.

Associated system table: sys.querylog_calls.

PREPARE

PREPARE SQL_DML_statement-with-optional-question_mark-parameter-markers

Compiles a SQL statement into its execution plan. This is useful for statements which need to be executed many times but with different values each time, such as an INSERT or UPDATE or SELECT query.

Example:

PREPARE INSERT INTO towns (name, country, citizens) VALUES (?, ?, ?);

-- to find out which prepared statement id is assigned, run query:
SELECT statementid, statement, created FROM sys.prepared_statements;

EXECUTE 5('Amsterdam', 'NL', 856124);
EXECUTE 5('Berlin', 'DE', 3715930);

PREPARE SELECT id, name, schema_id FROM tables WHERE name like ?;

-- to find out which prepared statement id is assigned, run query:
SELECT statementid, statement, created FROM sys.prepared_statements
 WHERE statement ILIKE 'PREPARE SELECT id, name, schema_id FROM tables WHERE name like ?%';

EXECUTE 7( '%type%' );
EXECUTE 7('%id%');

DEALLOCATE 7;
DEALLOCATE ALL;

Note: You can prepare any DML command, such as SELECT, INSERT, UPDATE, DELETE, MERGE, CALL, etc. The prepared statement will be given a system identifier number which can be used in the EXECUTE and DEALLOCATE commands. Instead of keyword PREPARE you may also use PREP.

For details see: PrepareExec.

EXECUTE

EXECUTE prepared-SQL-id ( [ parm1_val [ , parm2_val ] [, ... ] ] )

Execute the prepared statement with specific parameter values

Example:

-- first find out which prepared statement id is assigned, run query:
SELECT statementid, statement, created FROM sys.prepared_statements;

EXECUTE 5('Amsterdam', 'NL', 856124);

EXECUTE 19('c-data');

Note: Instead of keyword EXECUTE you may also use EXEC. WARNING: when an error occurs in the user session, all the user prepared statement(s) are removed !!

For details see: PrepareExec.

DEALLOCATE

DEALLOCATE [ PREPARE ] { prepared-SQL-id | ALL }

Close a specific or all prepared statements created in this user session

Example:

-- first find out which prepared statement id's exist, run query:
SELECT statementid, statement, created FROM sys.prepared_statements;

DEALLOCATE PREPARE 65;
DEALLOCATE ALL;

For details see: PrepareExec.

SET

SET [ schema_name . ] variable_name = new_value_expression

Change the value of a declared variable

For details see: Variables.

SET CURRENT_TIMEZONE

SET CURRENT_TIMEZONE = minutes

Change the current timezone offset from GMT

Example:

SELECT CURRENT_TIMEZONE;
SET CURRENT_TIMEZONE = 3600;

For details see: Variables.

Associated system table: sys.var_values.

SET TIME ZONE

SET TIME ZONE { LOCAL | INTERVAL 'hh:mi' HOUR TO MINUTE }

Change the current timezone

Example:

SELECT CURRENT_TIMEZONE;
SET TIME ZONE LOCAL;
SELECT CURRENT_TIMEZONE;
SET TIME ZONE INTERVAL '+02:00' HOUR TO MINUTE;
SET TIME ZONE INTERVAL '3' HOUR;
SET TIME ZONE INTERVAL '240' MINUTE;
SET TIME ZONE INTERVAL '-3600' SECOND;

For details see: Variables , TemporalTypes.

CREATE ROLE

CREATE ROLE _role_name
    [ WITH ADMIN grantor ]

Define a new role. You can use the role to grant privileges and next grant a role (or multiple roles) to specific users. This eases the maintenance of specifying privileges to new users or changing privileges for a set of users which have the same role.

Example:

CREATE ROLE controller;

For details see: Roles.

Associated system table: sys.roles and sys.auths.

CREATE USER

CREATE USER user_login_name
    WITH [ ENCRYPTED | UNENCRYPTED ] PASSWORD pass_phrase
    NAME full_name
    [ SCHEMA schema_name ]
    [ SCHEMA PATH schema_names_list_as_string ]
    [ MAX_MEMORY num_bytes | NO MAX_MEMORY ]
    [ MAX_WORKERS count | NO MAX_WORKERS ]
    [ OPTIMIZER optimizer_name ]
    [ DEFAULT ROLE role_name ]

Define a new database user account. Only monetdb administrator may create new database users.

Example:

CREATE USER "Donald" WITH UNENCRYPTED PASSWORD 'Secret' NAME 'Donald Duck' SCHEMA "app1"
    SCHEMA PATH '"app1","sys","tmp"' MAX_MEMORY 8000000 MAX_WORKERS 12 OPTIMIZER optimizer DEFAULT ROLE "boss";

For details see: Users.

Associated system table: sys.users

ALTER USER RENAME

ALTER USER user_login_name
    RENAME TO new_user_login_name

Change the user id name of a database user account

For details see: Privileges.

Associated system table: sys.users.

ALTER USER SET PASSWORD

ALTER USER SET [ ENCRYPTED | UNENCRYPTED ] PASSWORD new_pass_phrase
    USING OLD PASSWORD old_pass_phrase

Change the password of the current user account

Example to change the default password of system user monetdb (when connected as monetdb):

SELECT CURRENT_USER;
ALTER USER SET PASSWORD 'make it private' USING OLD PASSWORD 'monetdb';

For details see: Privileges.

Associated system table: sys.users.

ALTER USER SET

ALTER USER user_login_name
    [ WITH [ ENCRYPTED | UNENCRYPTED ] PASSWORD pass_phrase ]
    [ SET SCHEMA schema_name ]
    [ SCHEMA PATH schema_names_list_as_string ]
    [ DEFAULT ROLE role_name ]
    [ MAX_MEMORY num_bytes | NO MAX_MEMORY ]
    [ MAX_WORKERS count | NO MAX_WORKERS ]

Change the default schema or other properties of a database user account

For details see: Privileges.

Associated system table: sys.users.

DROP ROLE

DROP ROLE role_name [ WITH ADMIN grantor ]

Remove an existing role

Example:

DROP ROLE controller;

Note: Associated role privileges and granted user_role records will also be removed from sys.privileges and sys.user_role

For details see: Privileges. and: DropStatement.

See also: CREATE ROLE, GRANT ROLE , SET ROLE.

Associated system table: sys.roles.

DROP USER

DROP USER user_login_name

Remove an existing database login account

Note: Associated user privileges and granted user_role records will also be removed from sys.privileges and sys.user_role

For details see: Users and: DropStatement.

See also: CREATE USER, ALTER USER RENAME.

Associated system table: sys.users.

GRANT PRIVILEGES

GRANT { SELECT | INSERT | UPDATE | DELETE | TRUNCATE | REFERENCES | ALL [ PRIVILEGES ] | EXECUTE | COPY INTO | COPY FROM }
    [, ... ]
    ON [ TABLE | FUNCTION | PROCEDURE | AGGREGATE | WINDOW ] object_name
    TO { user_login_name | role_name | PUBLIC } [, ... ]
    [ WITH GRANT OPTION ]

Add privileges on a table or function (incl. procedure, filter function, loader) or aggregate function for a user or role or all users (PUBLIC). For tables the privileges can be: SELECT, INSERT, UPDATE, DELETE, TRUNCATE, REFERENCES, ALL, COPY INTO, COPY FROM. ALL implies privileges: SELECT, INSERT, UPDATE, DELETE, TRUNCATE and REFERENCES. Note: privilege REFERENCES is currently implemented as a synonym for SELECT. For aggregates, functions and procedures the privilege can be: EXECUTE or ALL. The privileges COPY INTO, COPY FROM enable execution of those COPY INTO, COPY FROM commands to users other than the monetdb system user.

Example:

GRANT ALL ON TABLE web_event TO PUBLIC;
GRANT SELECT, INSERT ON TABLE "web_log" TO jan, piet, controller WITH GRANT OPTION;
GRANT EXECUTE ON FUNCTION refresh_func TO PUBLIC;
GRANT COPY INTO, COPY FROM ON TABLE new_facts TO mrdata;

Note: The current user must have permission to GRANT privileges. The COPY INTO and COPY FROM privileges are MonetDB specific SQL.

For details see: Privileges.

Associated system table: sys.privileges.

REVOKE PRIVILEGES

REVOKE [ GRANT OPTION FOR ]
    { SELECT | INSERT | UPDATE | DELETE | TRUNCATE | REFERENCES | ALL [ PRIVILEGES ] | EXECUTE | COPY INTO | COPY FROM }
    [, ... ]
    ON [ TABLE | FUNCTION | AGGREGATE | WINDOW ] object_name
    FROM { user_login_name | role_name | PUBLIC } [, ... ]

Remove privileges on a table or function (incl. procedure, filter function, loader) or aggregate function from a user or role or PUBLIC

Example:

REVOKE INSERT, DELETE, TRUNCATE ON TABLE web_event FROM jan;
REVOKE EXECUTE ON FUNCTION refresh_func FROM piet;

Note: The current user must have permission to GRANT privileges. The COPY INTO and COPY FROM privileges are MonetDB specific SQL.

For details see: Privileges, See also: GRANT PRIVILEGES, REVOKE ROLE, DROP USER.

Associated system table: sys.privileges.

GRANT ROLE

GRANT role_name [, ... ] TO user_login_name [, ... ]
    [ WITH ADMIN OPTION ]
    [ WITH ADMIN grantor ]

Add one or more role privileges to one or more users

Example:

GRANT controller TO jan WITH ADMIN OPTION;

For details see: Privileges.

Associated system table: sys.user_role.

REVOKE ROLE

REVOKE [ ADMIN OPTION FOR ] role_name [, ... ] FROM user_login_name [, ... ]

Remove one or more role privileges from one or more users

Example:

REVOKE controller FROM jan;

For details see: Privileges

SET SCHEMA

SET SCHEMA schema_name

Change the current schema

Example:

SELECT CURRENT_SCHEMA;
SET SCHEMA profiler;
SELECT CURRENT_SCHEMA;

For details see: SchemaDefinitions and: Variables.

SET ROLE

SET ROLE role_name

Change the current role

Example:

SELECT CURRENT_ROLE;
SET ROLE controller;
SELECT CURRENT_ROLE;

For details see: Roles and: Variables.

SET USER

SET USER = user_login_name

Change the current user to the specified user

Example:

SELECT USER;
SET USER = jan;
SELECT USER;

Note: USER is a synonym for CURRENT_USER

For details see: Privileges/Users.

and: Variables.

SET CURRENT_USER

SET CURRENT_USER = user_login_name

Change the current user to the specified user

Example:

SELECT CURRENT_USER;
SET CURRENT_USER = piet;
SELECT CURRENT_USER;

For details see: Privileges/Users and: Variables.

SET SESSION_USER

SET SESSION_USER = user_login_name

Change the session user to the specified user

Example:

SET SESSION_USER = isabel;
SELECT SESSION_USER;

For details see: Users, and: Variables.

SET SESSION AUTHORIZATION

SET SESSION AUTHORIZATION role_name

Change the session authorization to the specified role

For details see: Roles and: Variables.

COPY INTO FROM

COPY [ int_val [ OFFSET int_val ] RECORDS ]
    INTO [ schema_name . ] table_name
         [ '(' column_name [ ',' column_name [ ... ] ] ')' ]
    FROM file_name [ ',' file_name [ ... ] ]
     [ '(' ident [ STRING ] [ ',' ident [ STRING ] [ ... ] ] ')' ]
     [ ON { CLIENT | SERVER } ]
     [ [ USING ] DELIMITERS  field_separator
       [ ',' record_separator [ ',' string_quote ] ] ]
     [ NULL [ AS ] null_string ]
     [ BEST EFFORT ]
     [ FWF '(' pos [ ',' pos [ ... ] ] ')' ]

Read data (in UTF-8 encoding) from an external (compressed) csv/tsv/txt file and bulk insert it into an existing table

Note: This command is MonetDB specific. By default the file(s) must be accessible from the server where mserver5 process is running. It is possible to read the file(s) from the mclient or jdbcclient program by specifying ON CLIENT. Default behavior is ON SERVER. The ON CLIENT option is not supported in other programs or APIs (ODBC, python DBI, etc.). It can also read directly from a compressed file if the file name has extension: .bz2 or .gz or .xz or .lz4. Extension .zip is not recognised, use extension .gz instead. Jdbcclient only supports gz compression. The default field_separator is the pipe '|' character. To change to tab character specify: '\t'. The default record_separator is the newline '\n' character. The default string_quote character is no character. Warning: This is different from the default string_quote character used by COPY SELECT ... INTO. IMPORTANT: All character string data in the csv/tsv/txt file must be stored in UTF-8 character encoding. Other character encodings are not supported.

For details see: Loading.

Associated system table: sys.querylog_history.

COPY INTO FROM STDIN

COPY [ int_val [ OFFSET int_val ] RECORDS ]
    INTO [ schema_name . ] table_name
         [ '(' column_name [ ',' column_name [ ... ] ] ')' ]
    FROM STDIN
     [ '(' ident [ STRING ] [ ',' ident [ STRING ] [ ... ] ] ')' ]
     [ [ USING ] DELIMITERS  field_separator
       [ ',' record_separator [ ',' string_quote ] ] ]
     [ NULL [ AS ] null_string ]
     [ BEST EFFORT ]

Read data (in UTF-8 encoding) from console (stdin) and bulk insert it into an existing table

Note: This command is MonetDB specific. The default field_separator is the pipe '|' character. To change to tab character specify: '\t'. The default record_separator is the newline '\n' character. The default string_quote character is no character. Warning: This is different from the default string_quote character used by COPY SELECT ... INTO.

For details see: CSVBulkLoads and: SQLcopyinto.java example program.

Associated system table: sys.querylog_history.

COPY BINARY INTO FROM

COPY BINARY
    INTO [ schema_name . ] table_name
         [ '(' column_name [ ',' column_name [ ... ] ] ')' ]
    FROM file_name [ ',' file_name [ ... ] ]
     [ ON { CLIENT | SERVER } ]

Attach column data from an external binary file(s) to very quickly make it available to MonetDB as storage column(s)

Note: This command is MonetDB specific. By default the files must be accessible from the server where mserver5 process is running. It is possible to read the file from the mclient or jdbcclient program by specifying ON CLIENT. Default behavior is ON SERVER. The ON CLIENT option is not supported in other programs or APIs (ODBC, python DBI, etc.). IMPORTANT: not all datatypes are supported. Especially all variable length data types such as varchar are not supported. Also a NULL value must be represented as a special value, which is different per datatype.

For details see: BinaryBulkLoad.

Associated system table: sys.querylog_history.

COPY LOADER INTO FROM

COPY LOADER INTO [ schema_name . ] table_name
    FROM function_name ( [ arg1_val [ , arg2_val ] [, ... ] ] )

Read data via a loader function and bulk insert it into an existing table

Example:

COPY LOADER INTO tbl FROM web_log_loader();

Note: This command is MonetDB specific. For a loader function defined in language PYTHON the Python script interpreter software must be available on the deployment server.

For details see: python-loader-functions.

Associated system table: sys.querylog_history.

COPY SELECT INTO

COPY SELECT_query
    INTO file_name
    [ ON { CLIENT | SERVER } ]
    [ [ USING ] DELIMITERS field_separator
      [ ',' record_separator [ ',' string_quote ] ] ]
    [ NULL AS null_string ]

Write query result data in bulk to a (compressed) file on disk in UTF-8 encoding

Note: This command is MonetDB specific. By default the file path must be accessible from the server where mserver5 process is running. It is now possible to write the file locally by the mclient or jdbcclient program by specifying ON CLIENT. Default behavior is ON SERVER. The ON CLIENT option is not supported in other programs or APIs (ODBC, python DBI, etc.). The default field_separator is the pipe '|' character. To change to tab character specify: '\t'. The default record_separator is the newline '\n' character. The default string_quote character is a double quote: ". Warning: This is different from the default string_quote character used by COPY INTO FROM. Character data will be exported in UTF-8 encoding. Other encodings are not supported. The file can also be written directly as compressed file if the file name has extension: .bz2 or .gz or .xz or .lz4. Extension .zip is not recognised, use extension .gz instead. Jdbcclient only supports gz compression.

For details see: DExportingBulkData.

Associated system table: sys.querylog_history.

COPY SELECT INTO STDOUT

COPY SELECT_query
    INTO STDOUT
    [ [ USING ] DELIMITERS field_separator
      [ ',' record_separator [ ',' string_quote ] ] ]
    [ NULL AS null_string ]

Write query result data to console (stdout) in UTF-8 encoding

Note: This command is MonetDB specific. The default field_separator is the pipe '|' character. To change to tab character specify: '\t'. The default record_separator is the newline '\n' character. The default string_quote character is a double quote: ". Warning: This is different from the default string_quote character used by COPY INTO FROM.

For details see: ExportingBulkData.

Associated system table: sys.querylog_history.

SET TRANSACTION

SET TRANSACTION [ READ ONLY | READ WRITE | ISOLATION LEVEL { READ UNCOMMITTED | READ COMMITTED | REPEATABLE READ | SERIALIZABLE } | DIAGNOSTICS sqlSize ]

Start a transaction (turn auto-commit off) with optionally a transaction mode or isolation level

Example:

SET TRANSACTION;
ROLLBACK;
SET TRANSACTION READ ONLY;
ROLLBACK;
SET TRANSACTION READ WRITE;
ROLLBACK;
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
ROLLBACK;
SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
ROLLBACK;
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
ROLLBACK;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
ROLLBACK;

SET LOCAL TRANSACTION

SET LOCAL TRANSACTION [ READ ONLY | READ WRITE | ISOLATION LEVEL { READ UNCOMMITTED | READ COMMITTED | REPEATABLE READ | SERIALIZABLE } | DIAGNOSTICS sqlSize ]

Start a local transaction (turn auto-commit off) with optionally a transaction mode or isolation level

START TRANSACTION

{ START | BEGIN } TRANSACTION [ READ ONLY | READ WRITE | ISOLATION LEVEL { READ UNCOMMITTED | READ COMMITTED | REPEATABLE READ | SERIALIZABLE } | DIAGNOSTICS sqlSize ]

Disable auto-commit and start a user controlled transaction

Note: A transaction can also include data definition (DDL) commands such as CREATE, ALTER, DROP.

For details see: Transactions.

COMMIT

COMMIT [ WORK ]  [ AND [ NO ] CHAIN ]

Make all changes done since the start of the transaction persistent

For details see: Transactions.

ROLLBACK

ROLLBACK [ WORK ] [ AND [ NO ] CHAIN ]

Undo all changes done since the start of the transaction

For details see: Transactions.

SAVEPOINT

SAVEPOINT savepoint_id_name

Add a savepoint within a transaction

Example:

START TRANSACTION;
SAVEPOINT sp1;

Note: You need to start a transaction first before you can use savepoints

ROLLBACK TO SAVEPOINT

ROLLBACK [ WORK ] [ AND [ NO ] CHAIN ] TO SAVEPOINT savepoint_id_name

Undo all changes done since the start of the savepoint

Example:

ROLLBACK TO SAVEPOINT sp1;

See also: SAVEPOINT , RELEASE SAVEPOINT.

RELEASE SAVEPOINT

RELEASE SAVEPOINT savepoint_id_name

Add all changes done since the start of the savepoint to the current transaction

Example:

RELEASE SAVEPOINT sp1;

See also: SAVEPOINT, ROLLBACK TO SAVEPOINT.

SET OPTIMIZER

SET [ sys. ] optimizer = optimizer_pipeline_name

Change the execution optimizer pipeline

Example:

SELECT sys.optimizer;
SELECT * FROM sys.optimizers;
SET sys.optimizer = 'sequential_pipe';

SET schema sys;
SELECT optimizer;
SET optimizer = 'default_pipe';
SELECT optimizer;
SET optimizer = 'ceci_nest_pas_une_pipe';
SELECT optimizer;

For details see: OptimizerPipelines.

EXPLAIN

EXPLAIN The SQL command

Show the MAL execution plan for the SQL command.

For details see: Explain.

PLAN

PLAN The SQL command

Show the relational execution plan for the SQL command after it has been optimized by the SQL optimzer.

Note: This command is MonetDB specific.

For details see: PlanSQL

TRACE

TRACE The SQL command

Executes the SQL command and return a table with the execution ticks of the MAL instructions.

For details see: Trace

Associated system table: sys.tracelog()

ANALYZE

ANALYZE schema_name [ . table_name [ ( column_name [, column_name] [, ... ] ) ] ]

Analyze and update statistics on column(s) of table(s) in a specific schema. When only the schema name is specified all tables in that schema are analyzed. When a schema and table name are specified all columns of that table are analyzed. When a schema, table and a column name(s) is specified only those columns of that table are analyzed.

The statistics information is used by the SQL query optimizer. (Re)Run the ANALYZE command after many table manipulations (insert/update/delete). For large tables or big schemas this command may take some time. The statistics information for user tables can be queried from system view: sys.statistics. The statistics information for all tables (including system tables) can be queried from system functions: sys.statistics() or sys.statistics('myschema') or sys.statistics('myschema','mytable') or sys.statistics('myschema','mytable','mycolumn').

Example:

-- update the statistics for new table sys.abc
CREATE TABLE sys.abc (id serial, name varchar(99) NOT NULL);
SELECT * FROM sys.statistics;

INSERT INTO sys.abc(name) values ('row1'), ('row2'), ('row3');
ANALYZE sys.abc;
SELECT * FROM sys.statistics;

INSERT INTO sys.abc(name) values ('row4'), ('row5'), ('row6');
ANALYZE sys.abc ("id", name);
SELECT * FROM sys.statistics WHERE "schema" = 'sys' AND "table" = 'abc';
-- or faster
SELECT * FROM sys.statistics('sys','abc');
SELECT * FROM sys.statistics('sys','abc','name');

Note: The system view sys.statistics only shows statistics for user tables. To also view statistics for system tables use: SELECT * FROM sys.statistics();

For details see: TableStatistics

Associated system view: sys.statistics

USER

USER

Example:

SELECT USER;

Note: USER is a synonym for CURRENT_USER

CURRENT_USER

CURRENT_USER

Example:

SELECT CURRENT_USER;

SESSION USER

SESSION_USER

Example:

SELECT SESSION_USER;

CURRENT_ROLE

CURRENT_ROLE

Example:

SELECT CURRENT_ROLE;

CURRENT_SCHEMA

CURRENT_SCHEMA

Example:

SELECT CURRENT_SCHEMA;

CURRENT_TIMEZONE

CURRENT_TIMEZONE

Example:

SELECT CURRENT_TIMEZONE;

For details see: DateTimeFunctionality.

NOW

NOW

Example:

SELECT NOW;

For details see: DateTimeFunctionality.

CURRENT_DATE

CURRENT_DATE

Example:

SELECT CURRENT_DATE;

For details see: DateTimeFunctionality.

CURRENT_TIME

CURRENT_TIME

Example:

SELECT CURRENT_TIME;

For details see: DateTimeFunctionality.

CURRENT_TIMESTAMP

CURRENT_TIMESTAMP

Example:

SELECT CURRENT_TIMESTAMP;

For details see: DateTimeFunctionality.

LOCALTIME

LOCALTIME

Example:

SELECT LOCALTIME;

For details see: DateTimeFunctionality.

LOCALTIMESTAMP

LOCALTIMESTAMP

Example:

SELECT LOCALTIMESTAMP;

For details see: DateTimeFunctionality.

NEXT VALUE FOR

NEXT VALUE FOR sequence_name

Example:

CREATE SEQUENCE "my_test_seq" as integer START WITH 2;
CREATE TABLE test (t int DEFAULT NEXT VALUE FOR "my_test_seq", v varchar(10));
INSERT INTO test(v) VALUES ('ab');
SELECT * FROM test;

For details see: SerialDatatypes